73984.87USD
54.99USD
1.38USD
0.09USD
2341.98USD
8.45USD
620.35USD
84.61USD
0.04USD
0.03USD
0.05USD
Post Q&A
HashBoard PSU Control board Overclock Downclock Liquid cooling Mine construction Operation and maintenance
The tester is normal, but machine is not working, and the log shows that the count is wrong. How to solve it?
@BTC-Miner
2023-07-08 06:52
1226
0
0
S9 hashboard the voltage and resistance are both normal, replace severial chips but stil report 50.
@Ada
2023-07-08 06:40
1367
0
0
The S9 hashboard report asic 62, replace the 62nd chip but still the same problem still exists.
@Ada
2023-07-08 06:36
1355
0
0
The S9 hashboard report 0, the domain voltage is 8V and there is short circuit domain.
@Ada
2023-07-08 06:23
1169
0
0
When testing the S9 board, as soon as the DC-DC is powered on, the hashboard immediately power off.
@Ada
2023-07-08 06:16
1244
0
0
S9 report asic 0, each domain voltage 0.37V up to 0.57V after reprogramming PIC
@Ada
2023-07-08 05:52
1368
0
0
What the problem shows in the picture? The hashboard is broken.
@Ada
2023-07-08 04:43
1266
0
0
Z11 hashboard without 3.3V
@Ada
2023-07-08 04:39
1168
0
0
Two hashboards of S9 both passed the single-board test, but the whole miner only had 2Th/s, one of the two boards without hashrate.Testing with an extended ribbon cable yields normal results.
@Ada
2023-07-08 03:52
1160
0
0
S9 Miner status shows one hashboard ideal hashrate over 7,000 GH/S, but activate high-temperature protection. Reprogram the PIC, the same error.
@Ada
2023-07-08 03:42
1171
0
0
All the T9+ hashboards can be detected,but all without hashrate.
@Ada
2023-07-08 03:22
1242
0
0
Single board test result keeps showing "check", without any specific result.Tested many times always the same.
@Ada
2023-07-08 03:17
1145
0
0
T9+ hashboard, 12V normal, 3.3V normal, MOS, PIC, power management chip are all normal, but no 9V output.
@Ada
2023-07-08 03:07
1205
0
0
The single board test is fine, but it cannot achieve the required hashrate.
@Ada
2023-07-08 02:54
1208
0
0
Chain 1 has low hashrate, pass single-board test OK,but reports temprature 15°C
@Ada
2023-07-08 02:33
1156
0
0
the hashboard reports asic 0, despite the RI signal is OK and the first chip has been replaced but the issue persists,
@Ada
2023-07-08 02:06
1144
0
0
PgUp...34567
Active Users
@Ada
43 participate in
@Sunny Anusi
37 participate in
@Yoda
34 participate in
@BTC-Miner
18 participate in
@Bogard
3 participate in
@jread352
2 participate in

No. 199, Zhaojuesi South Rd, Chenghua District, Chengdu, Sichuan, China

No.14, Jian'an Rd, Bao An District, ShenZhen, GuangDong, China

+86 15390421113

minerfixesofficial@gmail.com

About Us Contact Us FAQ News
Bitaxe Project Bitaxe Github OSMU Official OSMU Discord Bitaxe Web Flasher
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved