74240.41USD
55.24USD
1.38USD
0.1USD
2350.6USD
8.46USD
622.33USD
84.91USD
0.04USD
0.03USD
0.05USD
The single board test is fine, but it cannot achieve the required hashrate.
The kernel log show Chain 1 disconnected. Confirm the hashboard Chain 1 is in good working condition. Check for any loose connections on
2023-07-08 02:54
1208
0
Chain 1 has low hashrate, pass single-board test OK,but reports temprature 15°C
Possible solution 1: The 62nd chip may have a problem, try upgrading the firmware that addresses temperature issues.Possible solution 2:
2023-07-08 02:33
1157
0
the hashboard reports asic 0, despite the RI signal is OK and the first chip has been replaced but the issue persists,
If the board is reporting 0 asic, despite the RI signal is OK and the first chip has been replaced but the issue persists, there are a f
2023-07-08 02:06
1144
0
2022 Minerfixes - All Rights Reserved