86942.36USD
75.53USD
1.83USD
0.13USD
2921.66USD
11.84USD
836.26USD
122.22USD
0.11USD
0.04USD
0.1USD
Video Upload Q&A Likes Trends
The S9 hashboard report 0, the domain voltage is 8V and there is short circuit domain.
One voltage domain has a short circuit. Measure the voltage across the voltage domains starting from the first one and proceeding to the
2023-07-08 06:23
848
0
When testing the S9 board, as soon as the DC-DC is powered on, the hashboard immediately power off.
Check if there is a short circuit in the input of the DC-DC converter.Short circuits are commonly caused by faulty MOSFETs, and individu
2023-07-08 06:16
900
0
S9 report asic 0, each domain voltage 0.37V up to 0.57V after reprogramming PIC
2023-07-08 05:52
897
0
What the problem shows in the picture? The hashboard is broken.
This picture show PIC input circuit.Compared with a working hashboard to check the capacitor.
2023-07-08 04:43
868
0
Z11 hashboard without 3.3V
Check if there is any oxidation on the resistors and capacitors. You can compare with a working board for reference. Check the power man
2023-07-08 04:39
823
0
Two hashboards of S9 both passed the single-board test, but the whole miner only had 2Th/s, one of the two boards without hashrate.Testing with an extended ribbon cable yields normal results.
During the single-board test, increase the frequency in the fixture configuration file and test again to see if the chip with low hashra
2023-07-08 03:52
823
0
S9 Miner status shows one hashboard ideal hashrate over 7,000 GH/S, but activate high-temperature protection. Reprogram the PIC, the same error.
Read the kernel log to see which chip abnormal and replace it.Do single-board test to check which chip has an unusually high number of c
2023-07-08 03:42
815
0
All the T9+ hashboards can be detected,but all without hashrate.
The kernel log shows all hashboards Chip [0]. Just follow the asic 0 repair process.
2023-07-08 03:22
898
0
Single board test result keeps showing "check", without any specific result.Tested many times always the same.
If the temperature cannot be detected or there is an error in the signal detection, measure which chip's signal output is abnormal durin
2023-07-08 03:17
813
0
T9+ hashboard, 12V normal, 3.3V normal, MOS, PIC, power management chip are all normal, but no 9V output.
Check the last 5 domains of T9+ hashboard for any shorts (including 1.8V and LDO output 1.3V)Verify the PIC program is OK or not.Check t
2023-07-08 03:07
870
0
PgUp12345PgDn
Recommend
@5002230227
Other Roles
@phil50140
Other Roles
@LucleMineur
Individual Miner
@beauryan085
Other Roles
@28b5e4e7fc
Other Roles
@e5ab104bec
Other Roles
Hot Topics
Lucky Miner LV07 Firmware
3892
How To Install Bitmain S19 And S19j Pro Low Power Mode Firmware: Step-By-Step
3064
As shown in the picture below, T15 machine, 58, 59, 60 are all replaced, it still doesn’t work, what’s the problem.
2772
Lucky Miner Wi-Fi reconnect
2744
See the below single-board test result. There are 8.4V,8.5V domain voltage, replacing chip 1 did not work.
2623
LTC Mining with Lucky Miner Lv06
2615
Lucky miner v6
2220
Back to firmware Lucky Miner Lvl 06: I need the www.bin file. Can someone help?
2094
Cannot access IP address lucky miner
2084
Lucky miner LV06 breakdown
2027
Hot download
Luckyminer LV06-V2.3.0_upgrade firmware 页面升级固件
1400
Luckyminer LV06 factory firmware V2.1.0 页面升级固件
606
Luckyminer Management Tool
571
Solo Miner_Lucky Miner User Guide LV05-LV08_20231215
408
Luckyminer LV07 Instruction and User Guide PC English
174
Luckyminer LV 07 Product Manual
138
SOLO Miner_Nerdminer USB Shape（V3）配置说明1107
132
Luckyminer LV06 ESP-Prog JTAG Debug Guide_Tool kit
129
IceRiver_MinerTool_English_V1.0.15 (1)
126
Luckyminer乐透机用户使用说明LV05-LV08(2023.12.15)
87

No. 199, Zhaojuesi South Rd, Chenghua District, Chengdu, Sichuan, China

No.14, Jian'an Rd, Bao An District, ShenZhen, GuangDong, China

+86 15390421113

minerfixesofficial@gmail.com

About Us Contact Us FAQ News
Privacy Policy Terms & Conditions
2022 Minerfixes - All Rights Reserved